Aya Gold & Silver Reports High-Grade Silver Results at Zgounder

MONTREAL, Feb. 18, 2026 (GLOBE NEWSWIRE) -- Aya Gold & Silver Inc. (TSX: AYA; OTCQX: AYASF) (“Aya” or the “Corporation”) is pleased to announce high-grade silver drill results from its at-depth drill exploration program at the Zgounder Silver Mine in the Kingdom of Morocco. Highlights (all intersections are in core lengths) Intersections in the Open-Pit Area: Hole ZG-RC-25-853 intercepted 781 grams per tonne (“g/t”) silver (“Ag”) over 9.0 metres (“m”), including 1,295 g/t Ag over 5.0m Hole ZG-RC-25-855 intercepted 1,454 g/t Ag over 3.0m Intersections at Depth Near the Western Fault contact: Hole ZG-SF-25-340 intercepted 336 g/t Ag over 5.5m Hole ZG-SF-25-350 intercepted 2,198 g/t Ag over 1.0m Intersections in the Central Area: Hole ZG-SF-25-347 intercepted 3,581 g/t Ag over 4.5m, including 5,893 g/t Ag over 2.5m Hole ZG-SF-25-347 intercepted 1,729 g/t Ag over 4.1m, including 4,480 g/t Ag over 1.5m Hole T28-26-1072 intercepted 6,223 g/t Ag over 3.6m Hole T28-26-1104 intercepted 4,489 g/t Ag over 6.0m 3,117m or 10.3% of the 2026 exploration program has been drilled year to date. “Today’s high-grade results once again confirm the strong continuity of silver mineralization both at depth and around the open-pit area,” said Benoit La Salle, President & CEO. “Moreover, the new intersection at depth near the Western Fault contact in hole ZG-SF-25-340 extends mineralization further west, continuing to push the boundary of our current resource model.” This release contains results from 256 holes, which include 13 surface diamond drill holes (“DDH”), 69 underground DDH, 41 reverse circulation drill hole (“RC”), 101 T28 and 32 YAK holes (T28 and YAK: percussion drilling using an air-compressed hammer). For a full summary of today’s results, refer to Appendix 1. Table 1 – Best Intercepts at Zgounder in 2025 (core lengths) Hole ID From To Ag Length* Ag x width       (g/t) (m)   Underground DDH ZG-SF-25-339 251.5 253.0 1 733 1.5 2 600 ZG-SF-25-340 254.4 259.9 336 5.5 1 848 ZG-SF-25-341 341.0 345.0 1 075 4.0 4 300 Including 342.0 344.0 1 928 2.0 3 856 ZG-SF-25-342 282.5 286.0 652 3.5 2 282 ZG-SF-25-343 284.5 289.0 3 581 4.5 16 116 Including 284.5 287.0 5 893 2.5 14 732 ZG-SF-25-347 40.4 44.5 1 729 4.1 7 089 Including 43.0 44.5 4 480 1.5 6 720 ZG-SF-25-347 65.0 66.5 1 535 1.5 2 302 ZG-SF-25-347 127.0 128.5 1 228 1.5 1 842 ZG-SF-26-348 63.5 65.0 2 025 1.5 3 038 ZG-SF-26-348 129.0 133.5 1 366 4.5 6 149 ZG-SF-26-350 257.5 258.5 2 198 1.0 2 198 DZG-SF-25-776 43.0 48.5 1 138 5.5 6 260 Including 45.0 47.0 2 766 2.0 5 532 DZG-SF-25-777 53.5 58.0 844 4.5 3 798 Including 53.5 55.5 1 597 2.0 3 194 Surface RC ZG-RC-25-853 103.0 112.0 781 9.0 7 029 Including 106.0 111.0 1 295 5.0 6 474 ZG-RC-25-854 114.0 116.0 895 2.0 1 789 ZG-RC-25-855 85.0 88.0 1 454 3.0 4 362 Underground T28 T28-25-1047 0.0 12.0 155 12.0 1 865 T28-25-1049 2.4 8.4 476 6.0 2 858 T28-25-1059 22.8 26.4 6 223 3.6 22 404 T28-26-1072 9.6 14.4 961 4.8 4 612 Including 9.6 12.0 1 790 2.4 4 296 T28-26-1075 0.0 4.8 2 934 4.8 14 083 Including 0.0 2.4 5 725 2.4 13 740 T28-26-1103 24.0 26.4 988 2.4 2 371 T28-26-1104 19.2 25.2 4 489 6.0 26 933 T28-26-1119 8.4 13.2 285 4.8 1 368 T28-26-1127 19.2 25.2 273 6.0 1 637 T28-26-1130 7.2 12.0 373 4.8 1 790 Underground YAK YAK-25-408 3.6 4.8 6 060 1.2 7 272 * True widths are undetermined; all values are uncut. Figure 1: Location of Drill Results at Zgounder Quality Assurance For core drilling, all individual samples represent approximately one meter in length of core, which is halved. Half of the core is kept on site for reference, and its counterpart is sent for preparation and assaying to African Laboratory for Mining and Environment (“Afrilab”) in Marrakech, Morocco or to ALS Laboratory at the Zgounder Mine site. All samples are analyzed for silver, copper, iron, lead, and zinc using Aqua regia and finished by atomic absorption spectroscopy (“AAS”). Samples grading above 200 g/t Ag are reanalyzed by fire assay. For definition drilling using RC, all individual samples represent 1.0m in length and for T28 drilling equipment, all individual samples represent 1.2m in length. Samples are assayed at either the ALS Mine laboratory or at Afrilab. All samples are analyzed for silver, copper, iron, lead, and zinc using Aqua regia and finished by AAS. Samples grading above 200 g/t Ag are reanalyzed by fire assay. Rigorous quality controls (QaQc) are applied at both locations. David Lalonde, B.Sc. P. Geo, Vice-President Exploration, is Aya Gold & Silver’s Qualified Person and has reviewed this press release for accuracy and compliance with National Instrument 43-101. About Aya Gold & Silver Inc. Aya Gold & Silver is a Canadian precious metals mining company anchored in Morocco and active across the full mining value chain. The Corporation has established an exploration track record through a systematic, technology-led, data-driven approach and is focused on expanding its resource base and land package along the Anti-Atlas Fault — one of Africa’s most geologically rich, underexplored and mining-friendly regions. Aya operates Zgounder, a rare, silver-only mine, producing silver doré from its newly expanded processing facility. Aya’s growth pipeline includes the Boumadine polymetallic project, where feasibility study work is underway. The project hosts a substantial mineral resource, an extensive mineralized footprint, and significant potential for further discovery. Led by a proven team of mining professionals, Aya is guided by a vision of responsible mining and is committed to delivering sustainable value for shareholders, employees and host communities. For additional information, please visit Aya’s website at www.ayagoldsilver.com. Or contact Benoit La Salle, FCPA, MBA President & CEO [email protected] Alex Ball VP, Corporate Development & IR [email protected]     Forward-Looking Statements This press release contains certain statements that constitute forward-looking information within the meaning of applicable securities laws (“forward-looking statements”), which reflects management’s expectations regarding Aya’s future growth and business prospects (including the timing and development of new deposits and the success of exploration activities) and other opportunities. Wherever possible, words such as “aim”, “anticipate”, “assume”, “believe”, “estimate”, “expect”, “goal”, “intend”, “objective”, “plan”, “potential”, “strategy”, “target”, and similar expressions or statements that certain actions, events or results “may”, “could”, “would”, “might”, “will”, or are “likely” to be taken, occur or be achieved, have been used to identify such forward-looking information. Specific forward-looking statements in this press release include, but are not limited to, statements and information with respect to the potential to confirm continuity of mineralization and extent mineralization to the west and other assumptions and factors generally associated with the mining industry. Forward-looking information is based upon certain assumptions and other important factors that, if untrue, could cause the actual results, performance or achievements of the Corporation to be materially different from future results, performance or achievements expressed or implied by such information or statements. There can be no assurance that such information or statements will prove to be accurate. Key assumptions upon which the Corporation’s forward-looking information is based include without limitation, the Corporation’s ability to timely receive any requisite approvals, permits or licences; the Corporation’s ability to import goods and machinery; the Corporation’s ability to engage and retain all necessary personnel in order to operate its business properly and without interruption; the accuracy and reliability of estimates, projections, forecasts, studies and assessments, including the Mineral Reserve and Mineral Resource Estimates (including, but not limited to, ore tonnage and ore grade estimates); the Corporation’s ability to meet or achieve estimates, projections and forecasts; assumptions regarding development and exploration activities; the timing, extent, duration and economic viability of such explorations activities; the price of silver; the price of gold; exchange rates; taxation levels; fuel and energy costs; future economic conditions; the Corporation’s ability to meet current and future obligations; the Corporation’s ability to obtain timely financing on reasonable terms when required; anticipated future estimates of free cash flow; estimate future production; the current and future social, economic and political conditions and environment in which the Corporation operates; and other assumptions and factors generally associated with the mining industry. Readers are cautioned that the foregoing list is not exhaustive of all factors and assumptions which may have been used. Forward-looking statements are also subject to risks and uncertainties facing the Corporation’s business, any of which could have a material adverse effect on the Corporation’s business, financial condition, results of operations and growth prospects. Some of the risks the Corporation faces and the uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements include, among others: the inherent risks involved in exploration and development of mineral properties, including (1) there being no significant disruptions affecting the operations of the Corporation whether due to artisanal miners, access to water, extreme weather events and other or related natural disasters, labour disruptions, supply disruptions, power disruptions, damage to equipment or otherwise; (2) permitting, development, operations and production from the Project being consistent with the Corporation’s expectations; (3) political and legal developments in the Kingdom of Morocco being consistent with its current expectations; (4) the exchange rate between the U.S. dollar and the Moroccan Dirham being approximately consistent with current levels; (5) certain price assumptions for gold and silver; (6) prices for diesel, process reagents, fuel oil, electricity and other key supplies being approximately consistent with current levels; (7) production and cost of sales forecasts meeting expectations; (8) the accuracy of the current mineral resource estimates of the Corporation; (9) labour and materials costs increasing on a basis consistent with the Corporation’s current expectations; and (10) asset impairment (or reversal) potential, being consistent with the Corporation’s current expectations. In addition, readers are directed to carefully review the detailed risk discussion in the Corporation’s Annual Information Form and Management’s Discussion & Analysis for the year ended December 31, 2024, filed on SEDAR+, which discussions are incorporated by reference in this presentation, for a fuller understanding of the risks and uncertainties that affect the Corporation’s business and operations. Although the Corporation believes its expectations are based upon reasonable assumptions and has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. As such, these risks are not exhaustive; however, they should be considered carefully. If any of these risks or uncertainties materialize, actual results may vary materially from those anticipated in the forward-looking statements found herein. Due to the risks, uncertainties, and assumptions inherent in forward-looking statements, readers should not place undue reliance on forward-looking statements. Forward-looking statements contained herein are presented for the purpose of assisting investors in understanding the Corporation’s business plans, financial performance and condition and may not be appropriate for other purposes. The forward-looking statements contained herein are made only as of the date hereof. The Corporation disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except to the extent required by applicable law. The Corporation qualifies all of its forward-looking statements by these cautionary statements. Nothing in this document should be construed as either an offer to sell or a solicitation to buy or sell Aya securities. All references to Aya include its subsidiaries unless the context requires otherwise. Appendix 1 - Mineral Intercepts from Drilling at Zgounder (core lengths) Hole ID From To Ag (g/t) Length (m)* Ag x width Surface DDH ZG-25-167 520.2 521.2 212 1.0  212 ZG-25-170 212.0 212.5 92 0.5  46 ZG-25-170 216.0 216.5 128 0.5  64 ZG-25-170 220.5 221.0 84 0.5  42 ZG-25-172 181.0 182.5 177 1.5  266 ZG-25-172 202.0 203.0 76 1.0  76 ZG-25-173 23.5 29.5 101 6.0  606 ZG-25-173 34.0 35.5 320 1.5  480 ZG-25-178 229.5 230.2 86 0.7  60 ZG-26-180 209.5 211.0 240 1.5  359 Underground DDH ZG-SF-25-339 251.5 253.0 1 733 1.5 2 600 ZG-SF-25-339 261.0 264.0 164 3.0 492 ZG-SF-25-340 254.4 259.9 336 5.5 1 848 ZG-SF-25-340 262.9 264.9 264 2.0 528 ZG-SF-25-341 286.0 287.0 372 1.0 372 ZG-SF-25-341 341.0 345.0 1 075 4.0 4 300 Including 342.0 344.0 1 928 2.0 3 856 ZG-SF-25-342 260.0 262.0 133 2.0 267 ZG-SF-25-342 282.5 286.0 652 3.5 2 282 ZG-SF-25-342 360.5 362.0 76 1.5 114 ZG-SF-25-342 366.0 370.0 77 4.0 308 ZG-SF-25-342 381.0 382.5 92 1.5 138 ZG-SF-25-342 391.0 392.5 156 1.5 234 ZG-SF-25-343 284.5 289.0 3 581 4.5 16 116 Including 284.5 287.0 5 893 2.5 14 732 ZG-SF-25-344 302.5 303.4 916 0.9 824 ZG-SF-25-344 313.5 315.0 216 1.5 324 ZG-SF-25-344 318.0 319.5 104 1.5 156 ZG-SF-25-346 276.5 279.5 384 3.0 1 152 ZG-SF-25-347 40.4 44.5 1 729 4.1 7 089 Including 43.0 44.5 4 480 1.5 6 720 ZG-SF-25-347 65.0 66.5 1 535 1.5 2 302 ZG-SF-25-347 119.5 121.0 152 1.5 228 ZG-SF-25-347 127.0 128.5 1 228 1.5 1 842 ZG-SF-26-348 63.5 65.0 2 025 1.5 3 038 ZG-SF-26-348 129.0 133.5 1 366 4.5 6 149 ZG-SF-26-349 143.0 144.0 89 1.0 89 ZG-SF-26-349 157.0 158.0 76 1.0 76 ZG-SF-26-349 186.0 188.5 215 2.5 538 ZG-SF-26-350 257.5 258.5 2 198 1.0 2 198 ZG-SF-26-350 308.2 309.2 88 1.0 88 DZG-SF-25-747 85.0 85.6 272 0.6 163 DZG-SF-25-772 12.5 14.0 240 1.5 360 DZG-SF-25-772 51.5 52.0 2 000 0.5 1 000 DZG-SF-25-776 43.0 48.5 1 138 5.5 6 260 Including 45.0 47.0 2 766 2.0 5 532 DZG-SF-25-777 48.0 50.0 163 2.0 326 DZG-SF-25-777 53.5 58.0 844 4.5 3 798 Including 53.5 55.5 1 597 2.0 3 194 DZG-SF-25-778 7.5 11.3 310 3.8 1 178 DZG-SF-25-780 48.0 49.0 175 1.0 175 DZG-SF-25-780 59.0 60.5 82 1.5 123 DZG-SF-25-828 3.7 5.7 92 2.0 184 DZG-SF-25-840 32.0 35.5 143 3.5 499 DZG-SF-25-844 12.0 13.5 76 1.5 114 DZG-SF-26-832 18.9 20.5 146 1.6 234 DZG-SF-26-833 13.0 15.0 112 2.0 224 DZG-SF-26-858 102.0 103.5 155 1.5 232 DZG-SF-26-858 134.5 136.0 96 1.5 144 Surface RC ZG-RC-25-849 104.0 105.0 503 1.0 503 ZG-RC-25-850 113.0 114.0 87 1.0 87 ZG-RC-25-852 98.0 99.0 95 1.0 95 ZG-RC-25-853 92.0 95.0 332 3.0 995 ZG-RC-25-853 101.0 102.0 124 1.0 124 ZG-RC-25-853 103.0 112.0 781 9.0 7 029 Including 106.0 111.0 1 295 5.0 6 474 ZG-RC-25-853 134.0 135.0 83 1.0 83 ZG-RC-25-853 137.0 138.0 93 1.0 93 ZG-RC-25-854 9.0 10.0 110 1.0 110 ZG-RC-25-854 17.0 18.0 119 1.0 119 ZG-RC-25-854 114.0 116.0 895 2.0 1 789 ZG-RC-25-855 10.0 11.0 167 1.0 167 ZG-RC-25-855 77.0 78.0 86 1.0 86 ZG-RC-25-855 85.0 88.0 1 454 3.0 4 362 ZG-RC-25-855 97.0 100.0 139 3.0 416 ZG-RC-25-855 102.0 103.0 86 1.0 86 ZG-RC-25-857 49.0 51.0 184 2.0 367 ZG-RC-25-857 77.0 78.0 89 1.0 89 ZG-RC-25-857 91.0 92.0 159 1.0 159 ZG-RC-26-753 54.0 55.0 79 1.0 79 ZG-RC-26-806 10.0 11.0 85 1.0 85 ZG-RC-26-841 42.0 43.0 180 1.0 180 ZG-RC-26-841 70.0 71.0 192 1.0 192 ZG-RC-26-841 92.0 93.0 102 1.0 102 ZG-RC-26-920 57.0 58.0 80 1.0 80 Underground T28 T28-25-965 9.6 10.8 556 1.2 667 T28-25-970 9.6 12.0 99 2.4 238 T28-25-970 18.0 19.2 119 1.2 143 T28-25-971 3.6 6.0 390 2.4 935 T28-25-973 6.0 9.6 146 3.6 526 T28-25-977 3.6 6.0 114 2.4 272 T28-25-985 16.8 18.0 201 1.2 241 T28-25-987 22.8 26.4 132 3.6 474 T28-25-991 24.0 26.4 142 2.4 341 T28-25-998 2.4 3.6 93 1.2 112 T28-25-1000 16.8 18.0 188 1.2 226 T28-25-1001 2.4 3.6 94 1.2 113 T28-25-1040 9.6 12.0 192 2.4 461 T28-25-1046 10.8 12.0 82 1.2 98 T28-25-1047 0.0 12.0 155 12.0 1 865 T28-25-1047 14.4 15.6 113 1.2 136 T28-25-1048 0.0 2.4 118 2.4 283 T28-25-1048 7.2 8.4 91 1.2 109 T28-25-1048 9.6 10.8 101 1.2 121 T28-25-1049 2.4 8.4 476 6.0 2 858 T28-25-1049 18.0 19.2 76 1.2 91 T28-25-1050 20.4 22.8 211 2.4 505 T28-25-1055 14.4 15.6 113 1.2 136 T28-25-1057 10.8 12.0 216 1.2 259 T28-25-1057 14.4 18.0 180 3.6 647 T28-25-1059 22.8 26.4 6 223 3.6 22 404 T28-25-1062 24.0 25.2 91 1.2 109 T28-26-1066 3.6 4.8 203 1.2 244 T28-26-1070 7.2 8.4 94 1.2 113 T28-26-1072 9.6 14.4 961 4.8 4 612 Including 9.6 12.0 1 790 2.4 4 296 T28-26-1074 0.0 2.4 108 2.4 259 T28-26-1075 0.0 4.8 2 934 4.8 14 083 Including 0.0 2.4 5 725 2.4 13 740 T28-26-1101 2.4 6.0 105 3.6 379 T28-26-1103 24.0 26.4 988 2.4 2371 T28-26-1104 19.2 25.2 4 489 6.0 26 933 T28-26-1119 8.4 13.2 285 4.8 1 368 T28-26-1127 19.2 25.2 273 6.0 1 637 T28-26-1128 15.6 19.2 128 3.6 461 T28-26-1130 7.2 12.0 373 4.8 1 790 T28-26-1131 10.8 15.6 100 4.8 480 Underground YAK YAK-25-408 3.6 4.8 6 060 1.2 7 272 YAK-25-408 27.6 28.8 146 1.2 175 YAK-25-414 20.4 21.6 448 1.2 538 YAK-25-414 36.0 37.2 488 1.2 586 YAK-25-415 10.8 12.0 137 1.2 164 YAK-25-415 15.6 18.0 262 2.4 629 YAK-25-415 27.6 28.8 177 1.2 212 YAK-25-416 24.0 25.2 162 1.2 194 YAK-25-417 4.8 7.2 94 2.4 226 YAK-25-418 3.6 4.8 78 1.2 94 YAK-25-419 2.4 3.6 159 1.2 191 YAK-25-420 4.8 6.0 99 1.2 119 YAK-25-436 45.6 46.8 108 1.2 130 YAK-26-426 27.6 28.8 247 1.2 296 YAK-26-433 20.4 21.6 152 1.2 182 YAK-26-440 24.0 25.2 656 1.2 787 * True widths are undetermined; all values are uncut. Appendix 2 – Drillhole Coordinates of Zgounder Drill Hole with Significant Results Hole ID Easting Northing Elevation Azimuth Dip Length (m) Surface DDH ZG-25-167 620424 3403631 2069 347 -70 586 ZG-25-170 621141 3404366 2228 135 -54 242 ZG-25-172 621148 3404321 2216 135 -55 229 ZG-25-173 621274 3404365 2208 135 -55 154 ZG-25-178 621184 3404325 2206 135 -55 258 ZG-26-180 621099 3404223 2203 135 -55 245 Underground DDH ZG-SF-25-339 620460 3403911 1944 228 -87 351 ZG-SF-25-340 620334 3403899 1947 5 -75 420 ZG-SF-25-341 620474 3403931 1944 180 -79 359 ZG-SF-25-342 620433 3403906 1944 180 -80 396 ZG-SF-25-343 620507 3403922 1943 180 -80 338 ZG-SF-25-344 620408 3403902 1945 180 -78 408 ZG-SF-25-346 620308 3403893 1946 0 -83 450 ZG-SF-25-347 620585 3403951 1943 8 -45 291 ZG-SF-26-348 620585 3403951 1943 10 -54 251 ZG-SF-26-349 620708 3403967 1946 18 -60 200 ZG-SF-26-350 620308 3403893 1946 0 -80 459 DZG-SF-25-747 621087 3404030 1972 20 0 120 DZG-SF-25-772 620554 3404007 1909 72 -15 90 DZG-SF-25-776 620554 3404009 1908 50 0 80 DZG-SF-25-777 620554 3404009 1908 50 18 65 DZG-SF-25-778 620552 3404009 1908 26 -30 70 DZG-SF-25-780 620552 3404009 1908 26 0 70 DZG-SF-25-828 621127 3404082 2018 30 10 60 DZG-SF-25-840 620776 3404089 2069 75 20 60 DZG-SF-25-844 620757 3404094 2070 332 -30 60 DZG-SF-26-832 621129 3404072 2019 80 10 60 DZG-SF-26-833 621129 3404072 2019 80 20 30 DZG-SF-26-858 620692 3403983 1886 290 0 150 Surface RC ZG-RC-25-849 621257 3404264 2207 135 -70 105 ZG-RC-25-850 621249 3404274 2207 135 -70 115 ZG-RC-25-852 621258 3404283 2207 135 -70 120 ZG-RC-25-853 621276 3404281 2206 131 -68 150 ZG-RC-25-854 621267 3404291 2207 135 -70 120 ZG-RC-25-855 621285 3404289 2208 135 -70 123 ZG-RC-25-857 621249 3404169 2207 135 -69 116 ZG-RC-26-753 621174 3404188 2205 135 -70 60 ZG-RC-26-806 621198 3404158 2206 135 -70 60 ZG-RC-26-841 621211 3404222 2206 134 -69 108 ZG-RC-26-920 621278 3404333 2206 135 -70 80 Underground T28 T28-25-965 621204 3404043 2027 57 26 25 T28-25-970 621197 3404023 2025 37 13 26 T28-25-971 621178 3404013 2025 17 28 25 T28-25-973 620526 3404046 1936 60 22 25 T28-25-977 620518 3404053 1935 353 16 26 T28-25-985 620512 3404053 1936 176 25 23 T28-25-987 620535 3404015 1935 60 12 26 T28-25-991 620539 3404034 1935 55 12 26 T28-25-998 620498 3404065 1936 209 26 26 T28-25-1000 620517 3404036 1936 261 22 25 T28-25-1001 620533 3404022 1935 284 11 26 T28-25-1040 620528 3404000 1937 318 9 26 T28-25-1046 620928 3404094 1997 230 12 17 T28-25-1047 620928 3404094 1997 226 23 26 T28-25-1048 620929 3404086 1997 230 11 20 T28-25-1049 620929 3404086 1997 232 19 20 T28-25-1050 620933 3404084 1997 55 13 23 T28-25-1055 620932 3404100 1998 40 25 26 T28-25-1057 620927 3404100 1997 23 24 26 T28-25-1059 620925 3404100 1997 347 22 26 T28-25-1062 620918 3404098 1997 275 14 26 T28-26-1066 620681 3404109 2022 38 18 17 T28-26-1070 620674 3404107 2021 344 15 26 T28-26-1072 620671 3404106 2021 324 12 26 T28-26-1074 620666 3404104 2021 302 18 26 T28-26-1075 620667 3404103 2022 301 16 26 T28-26-1101 620624 3404039 1934 110 10 16 T28-26-1103 620624 3404039 1934 50 10 26 T28-26-1104 620624 3404039 1934 50 30 26 T28-26-1119 620569 3404034 1934 320 10 26 T28-26-1127 620587 3404017 1934 210 10 26 T28-26-1128 620592 3404016 1934 210 30 22 T28-26-1130 620592 3404016 1934 200 30 23 T28-26-1131 620599 3404010 1934 190 10 26 Underground YAK YAK-25-408 620701 3404085 2023 17 24 50 YAK-25-414 620878 3404049 2024 325 15 50 YAK-25-415 620693 3404075 2003 214 13 50 YAK-25-416 620693 3404075 2003 215 18 30 YAK-25-417 620702 3404068 2004 214 14 50 YAK-25-418 620702 3404068 2005 215 21 50 YAK-25-419 620710 3404060 2006 213 10 50 YAK-25-420 620710 3404060 2007 212 17 47 YAK-25-436 620799 3404044 1938 51 38 48 YAK-26-426 620795 3404050 1938 304 27 50 YAK-26-433 620800 3404054 1937 40 10 30 YAK-26-440 620701 3404092 2005 5 10 40 A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/af8c104e-6542-4a3e-a926-24eb45fc9e24 Figure 1 Location of Drill Results at Zgounder © 2026 Canjex Publishing Ltd. All rights reserved.