Scorpio Gold drills 92.81 m of 1.24 g/t Au at Manhattan

Mr. Zayn Kalyan reports SCORPIO GOLD DRILLS 1.24 GRAMS PER TONNE GOLD OVER 92.81 METRES AT THE MANHATTAN DISTRICT, NEVADA Scorpio Gold Corp. has released the first results from phase 1 of its 2025 drilling program at the Manhattan District project, Nevada, United States. The initial results from holes 25MN-011 and 25MN-012 intersect mineralization associated with the Reliance trend (see Table 1). To date, 11 diamond drill holes have been completed, totalling 3,820 metres. Further assay results are pending for the completed phase 1 drill holes and Manhattan's maiden resource estimate is anticipated in Q3. The results reported herein arrived post the effective date to be included in the upcoming resource estimate. Highlights Hole 25MN-011 returned: 1.24 grams per metric tonne (g/t) Au over 92.81 metres (m), including 19.01 g/t Au over 3.05 m; 1.79 g/t Au over 11.89 m, including 3.96 g/t Au over 4.06 m; 1.50 g/t Au over 25.15 m, including 3.62 g/t Au over 9.60 m. Phase one of the 2025 drilling program targets (1) the Gap zone, located between the historic Goldwedge and West Pit mines, along approximately 200 m of unexplored strike length; (2) Mustang Hill; and (3) the Zanzibar trend, connecting Goldwedge, along approximately 500 m of strike length to Mustang Hill's historic underground mines, see news release dated June 19, 2025. Holes 25MN-011 and 25MN-012 both targeted the Gap zone, intersecting Reliance trend mineralization connecting the West Pit and Goldwedge mines. Mineralization at depth in hole 25MN-011 creates a new deep target within the Gap zone. Low sulphidation veins are typically anastomosing and company geologists believe that hole 25MN-012 undercut the trend of mineralization by remaining in the trend's footwall. Scorpio Gold's vice-president of exploration, Harrison Pokrandt, commented: "These significant results confirm mineralization in the previously undrilled 200 m long Gap zone, which connects the historic West Pit to the permitted, previously operating Goldwedge underground mine. This unexplored zone is the nearest-term opportunity to add follow-on inventory to the upcoming compliant mineral resource estimate. The new deep zone within the Gap zone opens new opportunity to further expand the resource at depth along strike, not only below the Gap zone, but also below the base of existing drilling, that currently does not extend below 300 m vertical depth. We are awaiting additional drill results from holes drilled along the Gap zone, Mustang Hill and Zanzibar trend, as a part of the current phase 1 of this drilling program. These target zones are previously undrilled and connect known resources with historically mined areas. We believe that these drill holes will confirm the continuity of these high-grade zones and contributed to near-term resource expansion potential. With the initial resource estimate for the combined Manhattan property, as well as remnant historic resources scheduled for release soon, Scorpio Gold will have a new starting point and road map towards expanded resources." Diamond drill hole 25MN-011 was inclined negative 50 degrees and oriented to the southwest, to test the Reliance trend from the northeast side of the West Pit and was drilled to a length of 422 m. Hole 25MN-011 returned 0.54 g/t gold over 7.62 m from 39.62 m; 1.24 g/t gold over 92.81 m from 59.13 m; 1.79 g/t gold over 11.89 m from 168.40 m; 0.41 g/t gold over 7.62 m from 194.46 m; 1.22 g/t gold over 8.38 m from 290.78 m; 1.50 g/t gold over 25.15 m from 303.73 m; 0.12 g/t gold over 11.81 m from 338.02 m; and 0.33 g/t gold over 4.42 m from 354.79 m (see Table 1). The hole features and confirms mineralization near surface along the Reliance trend and establishes a new deeper mineralized zone through the trend. This new deep target within the Gap zone creates new opportunity for potential resource expansion at depth. Diamond drill hole 25MN-012 was inclined negative 55 degrees and oriented to the west, to test the Reliance trend from the northeast side of the West Pit and was drilled to a length of 373 m. Hole 25MN-012 returned 0.24 g/t gold over 6.10 m from 18.90 m; 0.11 g/t gold over 7.47 m from 49.23 m; 0.36 g/t gold over 9.14 m from 99.97 m; 0.16 g/t gold over 5.49 m from 145.39 m; 0.13 g/t gold over 5.00 m from 252.07 m; and 0.18 g/t gold over 5.79 m from 345.03 m (see Table 1). The hole features lower grade open-pit mineralization near surface and at depth along the Reliance trend. QA/QC (quality assurance/quality control) HQ sized diamond drill core samples were cut in halves, then bagged and secured with security tags to ensure integrity during transportation to the Reno, Nev., Paragon Geochemical facility for preparation. For quality assurance (QA), unmarked coarse blanks, unmarked certified reference materials and requested laboratory duplicates were inserted into the sampling sequence. QA samples were systematically inserted into each batch of samples, amounting to approximately 8 per cent of the run of samples. Samples were analyzed for gold using method PA-AU02 (about 500 g), a two-cycle PhotonAssay analysis of crushed material (70 per cent passing two millimetres). All Paragon Geochemical facilities comply with ISO 17025:2017. About the Manhattan District Manhattan lies in the Walker Lane trend of Nevada, United States, is road accessible, and is located approximately 20 kilometres south of the active Round Mountain gold mine, which has produced greater than 15 million ounces (oz) of gold (Au). For the first time in history, the company has amalgamated the district's past-producing mines under one entity, which has valuable permitting and water rights. Manhattan has historically produced approximately 700,000 oz Au from high-grade placer and lode operations from the late 1890s to as recently as the mid-2000s. Manhattan is interpreted as a low sulphidation epithermal Au rich deposit, which sits adjacent to the Tertiary-aged Manhattan caldera in the Southern Toquima range of Nevada. Qualified person The scientific and technical information in this news release has been reviewed, verified and approved by Thomas Poitras, PGeo, chief geologist of Scorpio Gold, a qualified person, as defined under National Instrument 43-101 -- Standards of Disclosure for Mineral Projects. Verification included review of laboratory certificates, review of field logs and chain-of-custody records, inspection of blank/standard/duplicate performance, and review of collar and down-hole survey data. No limitations or failures to verify were identified. About Scorpio Gold Corp. Scorpio Gold holds a 100-per-cent interest in the Manhattan District located in the Walker Lane trend of Nevada, United States. Scorpio Gold's Manhattan District is about 4,780 hectares and comprises the advanced exploration-stage Goldwedge mine, with a 400-ton-per-day maximum capacity gravity mill, and four past-producing pits that were acquired from Kinross in 2021 (see March 25, 2021, news release). The consolidated Manhattan District presents an exciting late-stage exploration opportunity, with over 140,000 metres of historical drilling, significant resource potential, and valuable permitting and water rights. We seek Safe Harbor.